Realtek PXE OPROM [Disabled]

This item appears only when you set the previous item to [Enabled] and allows you to enable or disable the PXE OptionRom of the Realtek LAN controller.

Configuration options: [Enabled] [Disabled]

Serial Port Configuration

The sub-items in this menu allow you to set the serial port configuration.

Serial Port [Enabled]

Allows you to enable or disable the serial port (COM).Configuration options: [Enabled] [Disabled]

Change Settings [IO=3F8h; IRQ=4]

This item appears only when you set the Serial Port to [Enabled] and allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]

2.6.8APM

Deep S4 [Disabled]

Allows you to enable or disable entering deep S4 sleep mode. The system in deep S4 state can be woken up via the power button, devices in LAN, or other ways except via the USB and PS/2 devices. Configuration options: [Enabled] [Disabled]

Restore AC Power Loss [Power Off]

[Power On]

The system goes into on state after an AC power loss.

[Power Off]

The system goes into off state after an AC power loss.

[Last State]

The system goes into either off or on state, whatever the system state was

 

before the AC power loss.

Power On By PS/2 Keyboard [Disabled]

[Disabled]

Disables the Power On by a PS/2 keyboard.

[Space Bar]

Sets the Space Bar on the PS/2 keyboard to turn on the system.

[Ctrl-Esc]

Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.

[Power Key]

Sets Power key on the PS/2 keyboard to turn on the system. This feature

 

requires an ATX power supply that provides at least 1A on the +5VSB lead.

Power On By PS/2 Mouse [Disabled]

[Disabled]

Disables the Power On by a PS/2 mouse.

[Enabled]

Enables the Power On by a PS/2 mouse. This feature requires an ATX

 

power supply that provides at least 1A on the +5VSB lead.

Power On By PCIE/PCI [Disabled]

[Disabled]

Disables the PCIE/PCI devices to generate a wake-on-LAN feature of the

 

Intel®/Realtek LAN device.

[Enabled]

Enables the PCIE/PCI devices to generate a wake-on-LAN feature of the

 

Intel®/Realtek LAN device.

2-32

Chapter 2: Getting started