6.USB 2.0 connectors
This connector is for USB 2.0 port. Connect the USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. This USB connector complies with USB 2.0 specification that supports up to 48 MBps connection speed.
DELUXE-Z87I
USB910
|
| USB+5V USB_P9- USB_P9+ | GND NC | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PIN 1 | USB+5V USB P10- USB P10+ | GND | |||||
|
| ||||||
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
• The USB 2.0 module is purchased separately.
• These connectors are based on xHCI specification. We recommend you to install the related driver to fully use the USB 2.0 ports under Windows® 7.
1 Chapter
Chapter 1: Product introduction |