Intel xHCI Mode [Smart Auto]

[Auto]

The xHCI is automatically enabled and runs at USB 3.0 mode when the

 

xHCI driver is installed in the operating system.

[Smart Auto]

Upon detection, the xHCI driver supports the USB 3.0 mode during both

 

POST and operating system.

[Enabled]

Enables the xHCI controller.

[Disabled]

Disables the xHCI controller.

EHCI Hand-off [Disabled]

[Enabled]

Enables the support for operating systems without an EHCI hand‑off

 

feature.

[Disabled]

Disables the EHCI Hand-off support.

Mass Storage Devices [Auto]

This item allows your system to detect the devices according to their media formats. Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM]

USB Single Port Control

This item allows you to enable or disable the individual USB ports.

Refer to section 1.2.2 Motherboard layout for the location of the USB ports.

3.6.6Platform Misc Configuration

The items in this menu allow you to configure the platform-related features.

3 Chapter

3-40

Chapter 3: BIOS setup