3.6.3PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
Scroll down to display the other BIOS items.
SATA Mode Selection [AHCI]
This item allows you to set the SATA configuration.
[Disabled] | Disables the SATA function. |
[IDE] | Set to [IDE] when you want to use the Serial ATA hard disk drives as |
| Parallel ATA physical storage devices. |
[AHCI] | Set to [AHCI] when you want the SATA hard disk drives to use the AHCI |
| (Advanced Host Controller Interface). The AHCI allows the onboard storage |
| driver to enable advanced Serial ATA features that increases storage |
| performance on random workloads by allowing the drive to internally |
| optimize the order of commands. |
[RAID] | Set to [RAID] when you want to create a RAID configuration from the SATA |
| hard disk drives. |
|
|
| The following item appears only when you set the SATA Mode Selection to [RAID]. |
|
|
Pcie Nand Configuration [Auto]
This item allows you to enable or disable PCIe NAND. Configuration options: [Auto] [Disabled] [Enabled]
Chapter 3
ASUS |