I N S T A L L A T I O N
1Connect the line cord.
Plug one end of the telephone line cord into the jack labeled TEL LINE on the back of the system. Plug the other end into a phone wall jack.
2Connect the telephone.
NOTE: If you do not want to connect a telephone, skip to Step 3.
Plug the line cord from the telephone into the jack labeled TEL SET on the back of the system.
3Connect the power cord.
Plug the power cord into the jack labeled POWER and into an electrical outlet not controlled by a wall switch. Fit the power cord behind the strain relief tab. The Message Window flashes CL to indicate that you need to set the clock.
Use only the power cord supplied with ! this product. If you need a replacement,
call 1 800
