14
About Caller Identification
When the first call is received,the unit sets the
current time and date automatically (you cannot set
them),and resets them each time a new call comes
in. (The time and date show 12:00 AMand 1-01
until Caller IDinformation is received.) The unit
automatically adjusts for daylight savings time.When
not in use,the unit displays the current date/time,
number of new calls received since the last review
of memory,and number of reviewed calls in call
history (up to 70).
For each call that comes in,the screen displays the
following information between the first and second
rings:
• Your caller’s name (up to 12 letters are sent
by your telephone company);
• The caller’s area code and telephone number
(the area code is not displayed if it is
programmed as the Home Area Code);
• The time and date of the call; and
• The position of the call in call history.
CALLER ID OPERATION
1Indicates unreviewed call information
2Position of call in call history
3Time call was received
4Date call was received
5Caller’s telephone number
6Caller’s name
1563 42
0240_Book_1ATTa_rev 3/25/02 9:27 AM Page 14