Installation and setup
After battery installation, place each handset in the telephone base or a charger and allow to charge for 16 hours before use. You can keep the battery packs charged by returning the handsets to the telephone base or chargers after each use. When the battery is fully depleted, a recharge takes about 12 hours. The average talk time on a fully charged bat- tery is about eight hours depending on environmental conditions, and the standby time is approximately four days.
Press in and downward on | Plug the battery | Place the battery |
the tab to open the battery | pack connector | pack and wires in |
compartment cover. | into handset. | the compartment. |
Plug telephone | Plug the large power adapter |
line cord into | into an electrical outlet not |
telephone jack. | controlled by a wall switch. |
Slide battery compartment cover up until it clicks closed.
Place handset in base or charger to charge for 16 hours before first use.
Caution: Use only the supplied rechargeable battery or replacement battery pack (part number
NOTES:
1.Use only the power cord supplied with this product. If you need a replacement, call 1 (800)
2.Be sure to use an electrical outlet not controlled by a wall switch.
