Display Control Keypad Options

Phone Operation Phone Options

Your Display Control Keypads can be set, by
your installer, for use as speakerphones. You
do not need an access code to use this feature.
To Answer an Incoming Call:
An incoming call is signaled by a ringing sound,
and the word PHONE will be flashing in the
display.
Press SELECT to answer the call. Select
HANGUP
when the call is completed.
To Make a Call:
Start at the Status Menu and press NEXT.
The Main Menu will appear with the word
SECURITY
flashing.
SECURITY
II
PHONEINTERCOM
II
>>
Touch Tone Ability: If your system is set for
pulse dialing, you can still use touch tones for
banking or business applications. If you need
touch tones, press
B
any time after you lift the
receiver. Touch tone dialing will remain active until
you hang up.
If your phone service allows touch tone operation,
your dealer can program your system to operate
permanently in this mode.
Flash: Allows you to send a flash, often needed to
access Call Waiting or similar calling features.
Hold: Allows you to put a call on hold. The
display will go back to the Main Menu. Select
HOLD, at any keypad, to take the call off hold.
Volume Control: You
can adjust the volume of
what you hear (but not the outgoing sound) by
moving the volume control on the side of the
keypad.
I
Select
PHONE.
J
The following screen will appear, with
HANGUP
flashing.
Multiple Phones: Like any other phone system,
you can use your keypad, with other keypads or
phones, in a group conversation.
I
’
J
I
Dial as you would any touch tone phone or
select HANGUP to end the call and go back
to previous screen.
NOTE: You
can select
MUTE
to turn off the
microphone. You will still be able to hear the
other person, but they will not hear you.
Select UNMUTE to return to your conversa-
tion.

Intercom

Your system can provide intercom service between
the Display Control Keypads, if this is part of your
installation package. You do not need an access
code to use this feature.
Starting at the Status Menu, press NEXT.
The Main Menu will appear. Select INTERCOM.
Your voice will be broadcast to all other Display
Control Keypads. When the person you wish to
speak with presses SELECT on another Display
Control Keypad, you will be able to have a two-
way conversation. Use the volume control to
adjust the volume of your intercom.
NOTE: The intercom can only be used by two
keypads at one time.
When the conversation is completed, either user
can select HANGUP to disconnect the call.
Select
>>
to return to the Status Menu.
11