AT&T 874 TELEPHONE FEATURE SETUP

10

Assign Intercom Number

1Do not lift the handset.

2Press G, *, #.

3Enter two digits (11–22).

4Press I. You will hear a confirmation ring.

NOTE: If you duplicate an intercom number, you’ll hear a warning tone.

Repeat Steps 1–4 and assign a different number.

5Pry up the intercom number card cover, write the intercom number

on the card, and replace the cover.

Set the Clock.

NOTE: You’ll hear a confirmation tone when you enter numbers correctly.

If you make a mistake, press and release S to start over.

1Press and release S. The screen displays zeros.

2Press and release * for AM or # for PM

— OR —

Go on to Step 3 if you want the clock set to military/European time.

3Enter two digits to set the month (for example, press 0 3 for

March).

4Enter two digits to set the date (for example, press 0 9 for the

ninth).

5Enter one digit for the day of the week (for example, press 1 for

Sunday or 5 for Thursday).

6Enter two digits for the hour (for example, press 0 1 for one

o’clock, or 1 1 for eleven o’clock).

7Enter two digits for the minutes (for example, press 3 1 for :31).

Set Dial Mode

1Press G, *, #, * .

2Press and release 2 for tone dialing

— OR —

Press and release 3 for pulse dialing.

3Press and release M. You’ll hear a confirmation ring if you’ve

entered information correctly.

TELEPHONE FEATURE SETUP

Contents

Main Page CONTENTS BEFORE YOU BEGIN ........................ 3 INSTALLATION................................. 4 TELEPHONE FEATURE SETUP ........ 10 OPERATION................................... 12 TELEPHONE MEMORY................... 19 Page BEFORE YOU BEGIN Table/Desk Installation Page Wall Installation Page Page Page TELEPHONE FEATURE SETUP Assign Intercom Number Set the Clock. Set Dial Mode TELEPHONE FEATURE SETUP Set for Two or Three Phone Lines Set Up for a Private Line Change BATTERY Display Page Making a Call Handset Speakerphone Call Privacy Canceling Call Privacy Volume Handset/Speakerphone Volume Control Ringer Volume Redial Auto Redial Hold Disabling Hold Reminder Switch Between Lines Mute Flash Temporary Tone Dialing Conference Calls Do Not Disturb Transfer a Call Transferring an Announced Call Transferring an Unannounced Call Page TELEPHONE MEMORY Directory Card TELEPHONE MEMORY Page Basic Intercom Operations Making an Intercom Call or Page Answering an Intercom Call or Page Ending an Intercom Call or Page Paging All Phones Answering an ALLPAGE Making an Intercom Conference Call Room Monitor Checking Your Station Number IN CASE OF DIFFICULTY No Dial Tone Call Cannot Be Dialed or is Dialed Slowly Interference on Intercom or Phone Calls Telephone Lights Flutter Continuously Page EXPANDING THE 874 SYSTEM Setup Checklist Setting Up a Fourth Line for Each Station Enabling/Disabling Attendant Station Attendant Operation Setting Ring Delay Duration Answering a Delayed Ring Picking Up Another Stations Line