Charge the handset battery | AT&T 9345 specification

9345_book_1ATT 6/5/01 11:33 AM Page 4

INSTALLATION

3Charge the handset battery.

Place the handset in the base. Charge the battery for at least 16 hours the first time.

4Check for dial tone.

After the batteries are charged, pick up the handset and press P; you should hear a dial tone.

5Set the dial mode.

If you have touch tone service, the phone is ready to use as soon as the batteries are charged.

If you have dial pulse (rotary) service, you’ll need to change the dial mode.

•Press G on the handset to enter programming mode.

•Press < or > until the screen displays DIAL TYPE: and the currently selected mode.

•Press s. The current setting blinks.

•Press > to select TONE or PULSE.

•Press s, to save the displayed mode.

4

Image 7

AT&T 9345 user manual Charge the handset battery

Contents

MHz Cordless Telephone with Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents About Caller Identification Caller ID Before YOU Begin Before You Install Installation Table/Desk Installation Charge the handset battery Wall Installation Telephone Operation Page/Handset Locator Temporary Tone Dialing Handset Ringer Style/Battery SaveHeadset Jack Display Screen Messages Operating Range Store Memory Numbers Telephone Memory Dial Edit Erase Edit Numbers Stored in Memory Dial Memory Numbers Delete Numbers Stored in Memory About Call History Caller ID OperationReview Call History Delete All Calls Delete Records from Call HistoryDial a Displayed Number Delete a Specific Call OVERWRITE? no Store a Call History Record in Memory Private Name Batteries Charging the Handset Battery Pack Replacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you hear noise or interference when using the phoneIf you lose a call after changing channels