TELEPHONE OPERATION
PROBLEM SOLUTION
LINE Lights Remain • Make sure thephone is programmed
OnWhen No Line is for that line to be absent. (See “Turn
Connected Line Usage On or Off for Each Line”
on page 29.)
• Make sure that your Line Groups are
programmed properly. (See “Assign the
Line Group for this Phone” on page 34.)
• Disconnect all other devices (fax,modem,
credit card reader,etc.) from any lines
connected to your 945 phone. These
devices can interfere with the telephone’s
data links.
• Make sure the total length of telephone
wiring used in your phone system is less
than 600 feet. In some cases a Z800A
filter can be used in a phone system with
more than 600 feet of wire. AT&T highly
recommends that a Z800A filter be installed
by a professional. AT&T CANNOT
guarantee that this telephone will work
with such a filter,and IS NOT responsible
for such installations. A Z800A filter can
be obtained by calling 1 800 222-3111.
(See “DSL Users” beginning on page 4 for
details.)
PROBLEM SOLUTION
Tone Signals Do Tone signaling does not work during
Not Activate a conference calls.
Remote Device
68
IN CASE OF DIFFICULTY
IN CASE OF DIFFICULTY
945 CIB 2ATT 3/14/05 9:58 AM Page 68