Answering system operation
Listen to messages on a cordless handset:
1. | When the handset is in idle mode, press MENU/SELECT to |
| |
>Play messages | |||
| enter the main menu. | ||
2. | Answering sys | ||
Press MENU/SELECT again to select >Play messages. | p | ||
|
| q |
•If there are new and old messages, press qCID or pDIR to select >Play new msgs or >Play old msgs, then press
MENU/SELECT. | >Play new msgs | |
Play old msgs | ||
• If there are only new messages, they will play | ||
| ||
automatically. |
|
Options during playback:
•Press PHONE/FLASH to stop playback. The screen shows Call back?, then press MENU/SELECT, 
PHONE/FLASH, or
/SPEAKER� to call back the caller.
•Press MENU/SELECT to pause playback and show the caller ID information if available. From here, you can press
OFF/CANCEL to resume playback or press PHONE/FLASH to call back the caller. If you do not
call back within 10 seconds, message playback resumes automatically.
3 New messages
ANS ON
10/15 10:01AM
Charlie Johnson
ANS ON
MSG# 10:01AM
1/3
•Press qCID/VOLUME or pDIR/VOLUME to adjust the message playback volume.
•Press EQ 
to adjust the message playback audio quality.
•Press 6 to skip to the next message.
•Press 4 to repeat the message. Press twice to hear the previous message.
•Press MUTE/DELETE to delete the message.
•Press 5 or OFF/CANCEL to stop the playback.
•Press 
/SPEAKER� to switch between speakerphone mode and handset mode.
NOTE: The equalizer stays on the same settings until you change it by pressing EQ
.
12
