2
A. INTRODUCTION
B. RECEIVING
C. LOCATION
D. FOUNDATION
E. PIPING
F. ELECTRICAL
G. COMPRESSED AIR CIRCUIT
1. Air to Air Heat Exchanger
2. Air to Refrigerant Heat Exchanger (Evaporator)
3. Drain Traps
H. REFRIGERANT CIRCUIT
1. Refrigerant Compressor
2. Air-Cooled Condenser and Condenser Fan Cycling Control (Low Ambient)
3. Air to Refrigerant Heat Exchanger (Evaporator)
4. Expansion Valves
5. Hot Gas Bypass Valve (D-320 and Larger)
6. Low Pressure Switch
7. High Pressure Switch
8. Crankcase Heater (D-320-A thru D-2000-A and D-400-W thru D-1000-W)
9. Automatic Water Regulating Valve
10. Oil Sightglass
11. Refrigerant Liquid Line Filter Dryer
12. Water Pressure Switch
13. Desuperheating Valve (D-1600 and Larger)
14. High Temperature Control
15. Start Timer
I. START-UP
J. DESIGN CONDITIONS
K. SHUTDOWN
L. WATER-COOLED MODELS: Cooling Water Requirements
M. MAINTENANCE
1. Drain Valves
2. Refrigeration Condenser
3. Condenser Fans
N. REMOTE CONDENSER INSTALLATION (OPTIONAL)
TROUBLESHOOTING GUIDE
WARRANTY PROCEDURES
OTHER AIR/TAK PRODUCTS