Getting Started
Battery installation & charging
After installation, place the handset in the base and allow the batteries to charge for 8 hours before use. You can keep batteries charged by returning the handset to the base after each use. When battery power is fully depleted, a full recharge takes about 6 hours.
Press coin into slot on base of handset to release latch, then remove battery cover.
To replace battery cover
Insert top tab first.
LOW
BATTERY
REDIAL MENU MEM
Low battery indicator
Return handset to base to recharge when this symbol flashes. (Handset will beep when battery is low.)
Insert supplied batteries.
Place handset in base to charge for 8 hours before first use. Rotate antenna to fully upright position.
Press down to click in place.
Caution: Use only the supplied NiCd battery or AT&T model 2AA NiMH replacement battery (SKU 26820). Do
not use alkaline batteries.
DID YOU KNOW?
Optional spare batteries can be kept charged in the base, for quick replacement when handset batteries become depleted (see page 28).
7
