Battery & charger installation
After installation, place the handset in the charger and allow the battery to charge for 12 hours before use. You can keep the battery charged by returning the handset to the charger after each use. When battery power is fully depleted, a full recharge takes about 8 hours.
Press coin into slot on base of handset to release latch, then remove cover.
Insert top tab first.
LOW BATTERY
RDL MENU MEM
Low battery indicator
Return handset to charger when this symbol flashes. (Handset will beep when battery is low.)
Insert supplied battery.
Place handset in charger for 12 hours before first use.
Plug power cord into jack on under- side of charger, then plug transformer into electrical outlet.
Press down to click in place.
Caution: Use only the supplied NiCd battery |
| |
(model 2403) or AT&T NiMH replacement battery | Light remains on while | |
(model 2401). | ||
battery is charging. | ||
|
2
