AT&T E2727B user manual Remote access

1. Dial your telephone number from any touch-tone phone.

2. When system answers, enter your two-digit remote access code (19 unless you have changed it).

3. Enter remote commands (see list at right).

4. Hang up to end call and save all undeleted messages.

NOTE: If you pause for more than 10 seconds dur-

ing remote access, you will hear a help menu listing all features & commands. If you issue no com- mand for another 20 seconds, the call will end automatically.

Answering System Operation

Remote access

Use the remote access feature to check your messages while you are away by calling your home phone num- ber from any touch tone phone outside of your home. When the answering system picks up, simply enter a two digit security code to then access your messages. This code is set at 19 by default; see page 32 to change it.

Play all messages	Press to listen to all messages.
1
Play new messages	Press to listen to new messages.
2
Delete the message	Press during playback to delete current
	message. Press 3 twice to delete all old
3
	messages while it is in remote access
33
	idle mode (message not playing back).
Repeat or go back	Press during the caller’s message to
4	repeat the message. Press during the
	beginning of the day and time announce-
	ment to go back to the previous mes-
	sage.
Stop	Press to stop any operation (stop play-
5	back, stop recording).
Skip to next message	Press to skip current message and
6	advance to next message.
Review announcement	Press to review current outgoing
#7	announcement.
Record announcement	Press * 7, wait for beep, then begin
*7to begin recording	speaking. Press 5 to stop recording and
5to stop recording	listen to playback of new announcement.
Record memo	Press 8, wait for beep, then begin
8to begin recording	speaking. Press 5 to stop recording.
5to stop recording
Review remote access code	Press # 9 to review remote access
#9	code.
Change remote access code	Press * 9 to change remote access
*9	code, then enter desired remote access
	code from 10-99.
Help menu	Press to hear list of features & com-
*5	mands.
Turn system off	Press to turn off answering system.
0	Incoming calls will no longer be
	answered.
Turn system on	If off, system will answer after 10 rings.
0	Enter your access code, then press 0 to
	turn on.

36