Battery installation & charging
After battery installation, the battery may have enough charge to allow for some calls. For best performance, place the handset(s) in the telephone base or charger(s) and allow to charge for 16 hours before use.
You can keep the battery charged by returning the handsets to the telephone base or chargers after each use. When the battery is fully depleted, a recharge takes about 12 hours. The average talk time on a fully charged battery is about eight hours depending on environmental conditions, and the standby time is approximately three days. Actual battery life will depend on usage conditions and age of battery.
1.Plug the battery securely into the plug inside the handset bat- tery compartment, matching the
2.Place the battery pack and wires inside the compartment.
3.Slide battery compartment cover towards the center until it clicks closed.
To replace the battery, press in and downward on the tab to open the battery compartment cover. Then lift out the old battery and disconnect. Follow the instructions on this page to install and charge the new battery.
4.The battery may have enough charge to allow some calls. For best performance, place the handset in the telephone base
or charger to charge for at lease 16 hours before first use.
TONE |
|
MUTE | REDIAL |
DELETE | PAUSE |
Caution: Use only the supplied rechargeable battery or replacement battery (model 27910, part number