AT&T E5925B user manual Remote access

91-000197-010-000_E5925B_R1.qxd 2/13/1950 7:21 PM Page 30

1. Dial your telephone number from any touch-tone phone.

2. When system answers, enter two digit remote access code (19 unless you have changed it).

3. Enter remote commands (see list at right).

4. Hang up to end call and save all undeleted messages.

NOTE: If you pause for more than 10 seconds during remote access, you will hear a help menu listing all features & commands. If you issue no command for another 20 seconds, the call will end automatically.

Answering System Operation

Remote access

A two digit security code is required to access your answering system from any touch-tone phone. This code is 19 by default; see page 26 to change it.

Play messages	Press to hear new messages (if none are
#2	new, all play back).
Repeat or go back	Press to repeat current message. Press
#4	twice (# 4 # 4) to hear previous message.
Skip to next message	Press to skip current message and
#6	advance to next message.
Stop	Press to stop any operation
#5	(stop playback, stop recording).
Delete message	Press during playback to delete current
#9	message.
Review announcement	Press to review current outgoing
#7	announcement.
Record announcement	Press * 7, wait for beep, then begin
*7to begin recording	speaking. Press # 5 to stop recording and
#5to stop recording	hear playback of new announcement.
Record memo	Press * 8, wait for beep, then begin
*8to begin recording	speaking. Press # 5 to stop recording.
#5to stop recording
Turn system off	Press to turn off answering system.
#0	Incoming calls will no longer be answered.
Turn system on	If off, system will answer after 10 rings. Enter
#0	your access code, then press # 0 to turn on.
Help Menu	Press to hear list of features & commands.
#1
Exit	End remote access call (or hang up).
*0

30