Battery installation & charging
Install the battery as shown below. After installing the battery, you can make and receive short calls, but replace the handset in the telephone base or additional charger when not in use. For optimal performance, charge the handset battery for at least 16 hours before use. When fully charged, the handset battery provides approximately five hours of talk time or three days of standby time.
If the battery is depleted, it may take approximately four minutes to charge the handset before it can resume screen display. The screen will continue to display LOW BATTERY until the battery has charged for approximately one hour.
THIS3.6VSIDE550mAhUP
BT5633/BT6823
Battery Pack
THIS SIDE UP
OR | BATTERIES | CHINAIN |
|
|
|
|
|
|
|
|
|
| |
WARNING:DONOT BURN |
|
|
|
|
| BATTERIES | CHINAIN |
| |||||
|
|
|
|
| UP | THISSIDEUP |
| NiMH- | BURNORNOT | BATTERIES |
| ||
BURNNOT |
|
|
|
|
| ||||||||
PUNCTURE | MADE |
|
| BT5633/BT6823 550mAh 3.6V | WARNING:DO PUNCTURE NO | MADE |
| ||||||
|
|
| OR | PUNCTURE BATTERIES |
| SIDETHIS | Battery Pack BT5633/BT6823BatteryPack | 3.6V550mAh | T |
|
| MADE INCHINA | |
Battery Pack BT5633/BT6823 3.6V 550mAh | WARNING:DO | MADE IN CHINA | WARNING:DO | PUNCTURE | |||||||||
Step 1 | Step 2 | Step 3 |
Plug the battery securely into the plug inside the handset battery compartment, matching the color- coded label.
Insert the supplied battery with the label THIS SIDE UP facing up as indicated.
Align the cover flat against the battery compartment cover, then slide it upwards until it clicks into place.
Step 4
Charge the handset by placing the handset face up in the telephone base or in the additional charger. The CHARGE light will be on when charging.
IMPORTANT INFORMATION
Use only the battery supplied with this product. To order a replacement or spare battery (AT&T model 27910, part number
www.telephones.att.com, or call 1 (800)
