Red Hat Linux:

USB keyboard and mouse drivers have to be installed on the system before Red Hat Linux will work with the the UC-100KMA. If the drivers aren’t already installed, do the following to install them:

1.With the computer powered off, plug a USB keyboard and mouse into its USB ports.

2.Power on the computer.

After the system installs the drivers, you can use the UC-100KMA at any time.

MAC:

The Mac can have both a UC100KMA attached keyboard and mouse and a Mac keyboard and mouse connected to the computer at the same time.

Sun:

The first time the Sun is run with the UC100KMA, it cannot have a Sun keyboard and mouse connected at the same time. After the first time, it can have a Sun keyboard and mouse attached at the same time.

- 6 -

2005-06-09