Operation

Hot Plugging

The Master View ACS-1712 / ACS-1714 supports USB hot plugging -
components can be removed and added back into the installation by unplugging
their cables from the CPU ports without the need to shut the unit down.

Powering Off and Restarting

If it becomes necessary to Power Off the Master View unit, before starting it
back up you must do the following:
1. Shut down all the computers that are attached to the unit.
Note: 1. You must unplug the power cords of any computers that have the
Keyboard Power On function that are connected to the shut down
switches. Otherwise, the switches will still receive power from the
computers.
2. If the unit is operating under external power, unplug the power
adapter cable.
2. Wait 10 seconds, then plug the Master View ACS-1712 / ACS-1714 unit back
in.
3. After the Master View unit is up, Power On the computers.
2001-07-05
ACS-1712 / ACS-1714 User Manual 7