Appendix
OSD Factory Default Settings
The factory default settings are as follows:
Setting |
| Default |
|
| |
OSD Hotkey | [Scroll Lock] [Scroll Lock] | |
|
| |
Port ID Display Position | Upper Left Corner | |
|
|
|
Port ID Display Duration | 3 | Seconds |
|
| |
Port ID Display Mode | The Port Number plus the Port Name | |
|
|
|
Scan Duration | 5 | Seconds |
|
|
|
Screen Blanker | 0 | (OFF) |
|
|
|
Logout Timeout | 0 | (OFF) |
|
| |
Beeper | Y (ON) | |
|
| |
Accessible Ports | F (Full) For all Users on all Ports | |
|
| |
Hotkey Command Mode | ON | |
|
|
|
Troubleshooting |
|
|
Problem |
| Solution | |
|
| ||
Keyboard and/or mouse do | For computers with PS/2 connectors, if you are using | ||
not work after computer boots | |||
up. | (keyboard, video, and mouse) are plugged into their | ||
| ports on the computer before starting the computer. | ||
| Plugging the cables in after the computer has booted | ||
| will not resolve the problem. | ||
|
| ||
When I emulate the Sun | To go into OK Mode, use the following key sequence: | ||
keyboard, I can't go into OK | 1. | Press and release [Ctrl] | |
Mode ([Stop] [A]). | |||
2. | Press and hold [T] | ||
| |||
| 3. | Press and hold [A] | |
| 4. | Release [T] and [A] together | |
|
| ||
When I press the LCD Auto | This occurs when the screen background color is set | ||
Adjust button, it leaves my | to black. Changing the screen background to a color | ||
screen in a scrambled state. | other than black resolves this problem. | ||
65