CL6700 User Manual

No.

Component

Description

 

 

 

1

Upper Handle

Pull to slide the LCD module out; push to slide it in.

 

 

See Opening the Console, page 13, for details on sliding the

 

 

console in and out

 

 

 

2

Module Release

In order to slide the console out, you must first release it by

 

Catches

sliding these catches to the inside.

 

 

 

3

LCD Module

After sliding the LCD module out, flip up the cover to access

 

 

the LCD display.

 

 

 

4

LCD Controls

The buttons to control the position and picture settings of the

 

 

LCD display are located here. See page 16, for details.

 

 

 

5

LCD On / Off

Push this button to turn the LCD monitor on and off. The

 

Button

button lights when the LCD monitor is off.

 

 

Note: The light indicates that only the monitor is off, not the

 

 

attached KVM switch.

 

 

 

6

Keyboard Module

Standard 105-key keyboard

 

 

 

7

Touchpad

Standard mouse touchpad

 

 

 

8

USB Port

The USB port is available to connect a USB peripheral

 

 

device (flash drive, CD-ROM drive, etc.) to the console, or a

 

 

USB mouse for users who prefer to use an external mouse.

 

 

 

9

Power LED

Lights (blue) to indicate that the unit is receiving power.

 

 

 

10

Rack Mounting

Rack mounting tabs are located at each corner of the unit.

 

Tabs

See Standard Rack Mounting, page 9, for details.

 

 

 

11

Lock LEDs

The Num Lock, Caps Lock, Scroll Lock LEDs are located

 

 

here.

 

 

 

12

Reset Switch

Located to the right of the Lock LEDs. Press this recessed

 

 

switch in with a thin object to perform a system reset.

 

 

 

13

Firmware

The firmware upgrade cable that transfers the firmware

 

Upgrade Port

upgrade data from the administrator’s computer plugs into

 

 

this RJ-11 connector.

14Firmware Upgrade Switch

During normal operation and while performing a firmware upgrade, this switch should be in the NORMAL position. If a firmware upgrade operation does not complete successfully, this switch is used to perform a firmware upgrade recovery. See Firmware Upgrade Recovery, page 27, for details.

6