Installation

1.Make sure that power to all the devices you will be connecting up have been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function.

2.To prevent damage to your installation due to ground potential difference, make sure that all devices on the installation are properly grounded.

Refer to the diagrams on pages 7 and 8 as you do the following:

1.Plug the Console Adapter Cable into the Console Port Connector on the rear panel of the CS-72E.

2.Plug your keyboard, monitor and mouse into their respective connectors on the Console Adapter Cable. Each connector is marked with an approprieate icon to indicate itself.

3.Use the custom KVM cables (described in the Cables section on p. 3), to connect the CS-72E CPU Ports to the monitor, keyboard and mouse ports of the computers you are installing.

4.If you choose to use external power, plug the power adapter into an AC power source, then plug the power adapter cable into the unit’s Power Jack.

Note: The power adapter should be DC9V with the inside positive and the outside negative:

5.Turn on the power to the computers.

Note: The CS-72E’s default is to link to the first computer you turn on.

- 6 -

2003-07-02