ATEN Technology UC410 manual Rear View

Chapter 1. Introduction

Rear View

1

		2	3	4
No.	Component		Description
1	Reset	This switch resets the device. Press and release to reset the
		UC410.
2	Game Port	The Game Port is used to connect the UC410 to a PS or
		Xbox game console. This port also provides power to the
		unit when connected to a game console.
3	PC Port	Use the PC port to connect the UC410 to a computer. This
		connection is used to configure the UC410 with the
		Phantom-S software, or connecting a laptop for game play.
		Note: The PC Port does not power the unit.
4	Power Port	This port provides power to the unit. You must use this port
		for power when connected to a computer; or if you are using
		an advanced keyboard that requires additional power during
		gameplay.
		Use a mini USB to USB cable to connect this port to a 5V
		power source.

5