Hardware Installation

Before you Begin

1. Make sure that the power to all the devices you will be connecting up has been turned off.

2.Make sure that all devices you will be connecting up are properly grounded.

Single Stage

Setting up the VS-0404 is simply a matter of plugging in the

cables. Refer to the Single Stage Installation Diagram: (the

numbers in the diagram correspond to the numbered steps) and do the following:

1.Use a high density HDB-15 male/female VGA cable to con- nect the computer’s video port to any available video input source port on the VS-0404.

2.Use a male/male audio cable to connect the computer’s speaker port to the audio input source port that corresponds to the video input source port you connected in step 1.

3.Connect the monitor to any available video output port on the VS-0404.

4.Connect the speakers to the audio output port that corresponds to the video output port you connected in step 3

Note: 1. Repeat steps 1 - 4 for any other ports you wish to set up.

2.When connecting computers to the switch, we strongly recommend you use custom VGA/Audio Combination Cables like the one provided with this package – see Installation Requirements, p. 4, for details.

- 7 -