10
Tool needed(not included)
(Q)(R)
wall strap (S)
wall
R
Q
10- Place wall strap (S) at desired position on the wall. Mark the hole position with a pencil. Drill a hole on the pencil mark made on the wall with a 10mm size Drill Bit. Insert plastic anchor(Q) into the wall. Fasten the wall strap(S) to the wall by inserting screw(R) through grommet in nylon strap(S) and then into wall anchor.
Note:Screwing wall anchor into stud is very important in properly securing the stand.
- 9 -
