Power Connection, Tlantic, THX Example, Option

Models 222 PBM, 262 PBM and 352 PBM THX

tlantic

ATECHNOLOGY

THX Example:

THX Subwoofer

Option 1

Option 2

Out/THX Input

THX Receiver/Amplifier

(Model 352 only)

Y-adapter

Option 1 is the

Sub

THX

most commonly

Woofer

used method of

Out

connecting two

subwoofers to a

THX system for

THRU

meeting THX

THX

INPUT

specifications. You

VARIABLE

INPUT

may also use a Y-

adapter as shown

MONO

in Option 2.

INPUT

LEVEL

Note that front

panel volume and

THRU

rear panel low

pass controls do

Left Sub Woofer

Right Sub Woofer

Left Sub Woofer

Right Sub Woofer

not function in this

configuration.

Note: The Variable Input on the 352 PBM serves the same purpose as the L/MONO input on the 222 and 262.

Power Connection

Connect the power cord to an AC outlet only after making all other connections to the subwoofer. This will avoid any chance of accidentally activating the subwoofer while wiring. The AC cord should be plugged into its own wall outlet or into a quality power strip. Avoid using a switched outlet on the rear panel of another component. The subwoofer can draw more current than these outlets can provide and performance will suffer. Once the subwoofer is hooked up and the power switch is turned on, leave it on. The automatic on/off circuitry will only activate the subwoofer in the presence of an audio signal from your audio/video system. After 7-10 minutes with no signal detected from the rest of the system, the amplifier will shut itself off and go into standby mode. When an audio signal is present, the power LED will glow green. Power consumption in the standby mode is negligible.

Atlantic Technology 262 PBM, 352 PBM THX, 222 PBM Power Connection, tlantic, THX Example, Option

Models: 262 PBM 222 PBM 352 PBM THX

THX Example:

Option 1

Power Connection