Unpacking and Assembly | 3 |
|
|
|
Instruction Manual
Unpacking the Speakers
Use care when unpacking the speakers. Since the grilles are packed off the speakers, be particularly careful of the driver elements as you unpack and move the speakers.Remember to keep the original boxes and packing mate- rial, in the unlikely event the speakers need servicing, or if you move.
Attaching the Feet
The cast aluminum feet with spikes are shipped unattached to the speaker. We recommend you attach the feet before proceeding to any other aspect of setup and installation.
Attach the feet to the bottom of the speaker cabinet as shown. The spikes can be adjusted to level the speaker. Circular metal discs are provided to protect hardwood floors.
Attaching the Grilles
Figure 2 |
Installing the glass top |
The included metal grilles are held to the front of the enclosures with power- ful neodymium magnets.There are depressions on the back of the grille that the magnets fit into. Once the speakers are in their final position, remove the grille from its protective plastic bag and carefully position it over the magnets on the baffle.
Move them together slowly and when you get close enough, the magnets will draw the grille in and hold it tight. Be careful not to get your fingers caught between the grille and the cabinet.
Glass Tops
Decorative smoked glass tops are provided for the
Figure 1
Attaching the feet
Attach feet to threaded inserts in bottom of cabinet with supplied screws.
Screw tips into foot. Adjust to level speaker.
Optional tip "toes" protect hardwood floors.
Figure 3
