Specifications | 7 |
Instruction Manual
Specifications
Model | ||
|
| |
Type | ||
|
|
|
Drivers Woofer | (2) | 4 ½” (115mm) GLH |
Tweeter | (1) | 1” (25mm) soft dome |
|
| |
Frequency Response | 70Hz – 20kHz ±3dB | |
|
| |
Nominal Impedance | 8 ohms | |
|
| |
Crossover Frequency | 3.5kHz, 3rd order | |
|
| |
Sensitivity | 88dB | |
|
|
|
Recommended Amplifier Power | 10 | – 150 Watts RMS |
|
| |
Dimensions w/grille (W x H x D) | 6.875 x 12.5 x 6.5” 175 x 320 x 166mm | |
|
| |
Weight (ea) | 12lbs; 5.5kg | |
|
|
|
IMPORTANT NOTE: The power recommendation for these speaker systems assumes that you will not operate your amplifier/receiver in a way that produces distortion. Even rugged speak- ers like ours can be damaged by an amplifier driven into audible distortion. The harsh amplifier distortion (“clipping”) that occurs in this situation will eventually cause damage to the speaker system. This type of damage may be cumulative and can build up over time, as the amplifier is driven into overload again and again. Such damage is easily identifiable through examination of the damaged speaker’s voice coil and is not covered by the warranty.
Specifications are those in effect at the time of printing. As part of our ongoing program of continuous product improvement, Atlantic Technology reserves the right to change specifica- tions or appearance at any time without notice.