![Table of Contents](/images/new-backgrounds/23418/234183x1.webp)
2 | Table of Contents |
System
Table of Contents
2Unpacking the Speakers
2Attaching the Grilles
3Individual Component Descriptions
3Model FS-3200 LR and FS-3200 C Speakers
3Acoustic Controls
3Optional Model 2200 SR Surround Speakers
4 Assembling the Speakers
5 Placement
5 Speaker Placement and Home Theater
5 Speaker Placement for a 3-Piece System
6 Speaker Placement — Optional Surround and Subwoofer
7 Surround Effects and Speaker Locations
7 6.1 and 7.1 Channel Systems
7 Connecting Your System
8 System Wiring
9 System Setup
9 Bass Management
9 Operation of Rear Panel Controls on the
10Care of Your Speakers
11Specifications
System FS-3200
High Performance Loudspeaker Components
Thank you for choosing Atlantic Technology products. Your new speaker components are
IMPORTANT: Although it may seem like asking for driving directions, please take a few moments to read all of this booklet. It has many helpful tips and ideas on properly setting up and using your system. We promise that if you take the time to read and follow these tips you’ll get better system performance and more enjoyment.
Unpacking the Speakers
Use care when unpacking the speakers. Remember to keep the original boxes and packing material,in the unlikely event the speakers need servic- ing, or if you move.
For Future Reference
Record the serial number and date of purchase for each speaker here. The serial number is found on the speaker terminal panel on the back of the enclosure.
Serial Number
Serial Number
Serial Number
Date of Purchase
The contents of this manual are Copyright © 2003 by Atlantic Technology International, Corp.,and may not be duplicated or reproduced by any means,whether physical,electronic or otherwise without prior written consent from Atlantic Technology International, Corp.
Atlantic Technology and theAtlantic Technology logo are registered trademarks of Atlantic Technology International, Corp.
Specifications are those in effect at the time of printing.Atlantic Technology International, Corp. reserves the right to change specifications or designs at any time without notice without obligation to modify existing units.
Attaching the Grilles
The included metal grilles are held to the front of the enclosures with power- ful neodymium magnets.There are depressions on the back of the grille that the magnets fit into.Once the speakers are in their final position.Position the grille over the magnets on the baffle.Move them together slowly and when you get close enough,the magnets will draw the grille in and hold it tight.Be careful not to get your fingers caught between the grille and the cabinet.
10/6/04 11:00:02 AM