Boundary Compensation, High Frequency Energy and Directivity switches
Solid MDF construction
Paintable grille and frame
Installation-friendly three piece system
The systems are uniquely easy to mount, since their GFR grille/frame assemblies are sold separately. This means the installer can run the wire to the speaker locations, then mount and paint the grille/frames to match the room. The speaker assemblies can be installed at a later time if desired, optimizing the timing of the project.
Carbon fiber 6½” woofers
Specifications
|
| |
Type |
| |
Drivers | Woofer | (2) 6 ½” (165mm) Carbon Fiber |
| Tweeter | 1” (25mm) LRT™ soft dome |
Frequency Response |
| 75Hz – 20kHz ±3dB |
Nominal Impedance |
| 6 Ohms |
Crossover Frequency |
| 800Hz, 2.2kHz |
Sensitivity |
| 89dB |
Recommended Power |
| 10 – 140 Watts RMS |
Dimensions (W x H x D) |
| 12 5⁄16 x 21 5⁄8 x 3 7⁄8” |
|
| 312 x 547 x 100mm |
Cutout Dimensions (W x H x D) | 11 1⁄8 x 20 3⁄8” | |
|
| 283 x 518mm |
Net Weight |
| 13lbs; 5.9kg each |
*IR Receiver not included
For ease of installation and total flexibility/ convenience, the
Punchout for use with IR Receivers*
Atlantic Technology is a registered trademark of Atlantic Technology International. THX and THX Select2 are trademarks of THX Inc.
Specifications subject to change without notice.
©2007 Atlantic Technology • 343 Vanderbilt Ave.