Speaker Wiring

7

 

 

 

Instruction Manual

 

Installing the Speaker Assembly

Speaker Connection

The clamping mechanism allows the wall material to range from ½" to 1½" (13 to 38 mm) in thickness. There must be a minimum depth behind the wall face of 35⁄8” (92 mm).As noted above, be sure to keep the top and bot-

tom of the cutout at least 1½"

(38mm) away from obstruc-

tions, as the rotating clamps

will not operate properly if

you don’t.

Insert the speaker into the cutout and using a level or square carefully align it so it is level.Tighten the mounting

screws, which will cause the attached clamps to rotate and position them- selves properly behind the wall.

Continue to tighten until the speaker is snug in the wall.You want the bezel to conform to the wallboard,and the frame not to rattle from the speaker’s vibration, but be very careful not to overtighten the screws.

It is strongly recommended that you hand-tighten the mounting screws the final few turns (after using an electric screwdriver set to "low torque") to avoid the possibility of damaging the frame.

Painting the Speaker Assembly

The white plastic frame and the metal grille may be left as is, or painted to match your décor. To paint the frame, place the included Paint Shield over the drivers, then carefully spray paint with a plastic-compatible paint. To paint the grille, first remove it from the speaker, then spray using a slightly thinned paint or with two very light coats.

Strip about ½" (13 mm) of insulation from the connecting wires. Connect them to the appropriate push terminal, being careful to observe polarity (positive to the red terminal, negative to the black terminal).

Specifications

Model

 

IWTS-30 SR

IWTS-14 SR

 

 

 

THX Certification

THX Ultra

NA

 

 

 

 

Type

 

2-way Dipole/Bipole

2-way Dipole/Bipole

 

 

Switchable

Switchable

 

 

 

 

Drivers

Woofer

(2) 5¼” (135mm) GLH§

(2) 4½” (115mm) GLH§

 

Tweeter

(2) 1" (25mm) soft dome

(2) 1" (25mm) soft dome

 

 

 

Frequency Response

80Hz – 20kHz ±3dB

100Hz – 20kHz ±3dB

 

 

 

Nominal Impedance

6 Ohms

6 Ohms

 

 

 

Crossover Frequency

3500Hz

4000Hz

 

 

 

 

Sensitivity

 

87dB

87dB

 

 

 

 

Recommended

 

25 – 150 Watts RMS

25-125 Watts RMS

Amplifier Power

 

 

 

 

 

 

Overall Dimensions

155⁄8 x 121⁄8 x 3¾"

155⁄8 x 121⁄8 x 3¾"

(W x H x D)

 

397 x 308 x 96mm

397 x 308 x 96mm

 

 

 

Cutout Dimensions

14¼ x 10¾"

14¼ x 10¾"

(W x H)

 

362 x 273mm

362 x 273mm

 

 

 

 

Weight (ea)

 

9lbs; 4.1kg

8lbs; 3.7kg

§Graphite Loaded Homopolymer

Specifications are those in effect at the time of printing. Atlantic Technology reserves the right to change specifications or appearance at any time without notice.

THX, and THX Select are trademarks of THX Inc. Dolby Digital, 5.1, Dolby Stereo and Dolby Pro Logic are trademarks of Dolby Laboratories Licensing Corporation. DTS is a registered trade- mark of DTS Technology.

Page 6 Page 8
Page 7
Image 7
Atlantic Technology IWTS-30 SR, IWTS-14 SR instruction manual Specifications, Painting the Speaker Assembly
Page 6 Page 8

IWTS-30 SR, IWTS-14 SR specifications

Atlantic Technology has long been recognized for its innovative audio solutions, and two standout offerings in their lineup are the IWTS-14 SR and IWTS-30 SR in-wall speakers. Designed for high-performance sound and seamless integration into home environments, these speakers provide a compelling option for audio enthusiasts and home theater enthusiasts alike.

The IWTS-14 SR is a two-way in-wall speaker that features a 1-inch soft dome tweeter and a 4.5-inch carbon-composite midrange driver. This configuration delivers a balanced sound profile, ensuring that vocals, instruments, and sound effects are reproduced with clarity and precision. The speaker is designed to handle a wide frequency range, making it suitable for various listening scenarios, from movies to music. Its unique coaxial design allows for broad dispersion, ensuring that sound is evenly distributed throughout the room.

On the other hand, the IWTS-30 SR takes performance a step further. This model features a 1-inch dome tweeter paired with dual 6.5-inch woofers, providing enhanced bass response and dynamic range. The increased driver size allows the IWTS-30 SR to produce deeper low frequencies, making it an ideal choice for those looking to create a cinematic experience in the comfort of their own homes. The speakers are also equipped with Atlantic Technology's proprietary technologies, such as the "Waveguide" tweeter technology, which further improves dispersion and detail in high-frequency response.

Both models are engineered with installation flexibility in mind. Their low-profile design allows for easy integration into any room, and the paintable grilles ensure they can seamlessly blend with any decor. The IWTS series also features Atlantic Technology's unique installation brackets, simplifying the mounting process and enabling precise placement for optimal listening positions.

Additionally, both the IWTS-14 SR and IWTS-30 SR are built to last. The materials used in their construction are durable and designed to withstand the test of time, even in high-performance scenarios. These speakers also come with Atlantic Technology's thoughtful design choices, such as a stylish bezel that enhances the overall aesthetics of the installation.

In summary, the Atlantic Technology IWTS-14 SR and IWTS-30 SR in-wall speakers are exceptional choices for anyone looking to enhance their home audio experience. With their powerful performance, innovative technologies, and discreet design, these speakers promise to deliver high-quality sound that perfectly complements any home theater setup or audio environment. Whether you're a movie buff, a music lover, or both, these speakers are engineered to elevate your listening experience.
Top Page Image Contents