3 
Instruction Manual
SB-1000 Subwoofer Rear Panel
Figure 1 |
|
|
|
|
|
|
|
4 | 3 | 5 | 2 | 1 | 8 | 7 |
|
|
|
|
|
|
|
| 6 |
|
|
|
|
|
|
| 11 |
|
|
|
|
|
|
| 12 |
|
|
|
|
|
|
| 10 |
|
|
|
|
|
| 230V | 115V |
|
|
|
|
|
|
| 9 |
1Bass Level Control
Use this control to set the level of bass desired
2Status LED
This will be green for "on" condition, amber for "standby"
3Standby Switch
When in ON position,the amplifier will always be on.When in the AUTO position, the amplifier will be in Automatic Standby Mode.
Crossover Control
4An adjustable (40Hz to 140Hz) @ 18dB per octave
Phase Switch
5This switch allows precise acoustic matching with satellite speaker systems whose output may be phase reversed. Try in both posi- tions — use the position that results in the strongest bass output.
6Crossover Switch
When in the NORMAL position, adjustment of the crossover can be made by the Crossover Control.If being fed a
7Low Level Output
The outputs allow daisy chaining of multiple subwoofers, or as a return path back to the processor.
8Low Level Input
Use the input to connect to the subwoofer or LFE line out from your processor/receiver.
9Product Serial Number
Write this number in the space provided on page 2 for future reference.
10Voltage Select Switch
Voltage switch for use in different countries.This switch will be set when you receive the unit. Change this setting only when you are sure your application requires it. For US, the switch should be set to the 115V position.
11On/Off Switch
Use this switch to turn the amplifier completely on or off.
12AC Input
Use the included power cord to connect your amplifier to a wall outlet.
