NetCamera NVW
4.2.4 Breach Manager
The Breach Manager submenu enables you to configure all breach alert and motion detection settings:
You can configure the system to capture images when either the motion sensors, DI1 or DI2 sensors are activated.
To set a breach alert, do the following:
Select the alert trigger device type by checking the Enable checkboxes next to each device.
Select the notification method from the list of options:
•Send
•Send images to FTP server : The system will send captured images to the FTP server when the device is triggered.
•Trigger GPIO output : The system will send a signal to the alarm devices.
52 |