NetCamera NVW
A.2 WEB
I cannot access the web configurator.
Steps | CORRECTIVE ACTION |
1 | Make sure you are using the correct IP address of the |
| NetCamera NVW. Check the IP address of the NetCamera |
| NVW (192.168.1.1). |
|
|
2 | Ping the device (ping 192.168.1.1) |
|
|
3 | Reset the device |
The web configurator does not display properly.
| Steps |
| CORRECTIVE ACTION |
|
|
| |
| 1 |
| Make sure you are using Internet Explorer 5.0 and later |
|
|
| versions. |
|
|
| |
| 2 |
| Make sure you are using Internet Explorer 5.0 and ActiveX is |
|
|
| installed. |
| 3 |
| Delete the temporary web files and log in again. |
|
|
| In Internet Explorer, click Tools, Internet Options and then click |
|
|
| the Delete Files ... button. |
|
|
| When a Delete Files window displays, select Delete all offline |
content and click OK. (Steps may vary depending on the version of your Internet browser.)
A.3 Login
If you forget the password to log in
Steps | CORRECTIVE ACTION |
|
|
1 | The Reset function is to reset the setting back to factory |
| default setting, once you press the “RESET” button within 10 |
| seconds. |
2 | Before configurating this device , you need to know the |
following default settings:
Password : admin
IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0
56 |