NetCamera NVW
Question | Why does a series of broad vertical white line appears |
| through out the image? |
|
|
Answer | A likely issue is that the CMOS sensor becomes overloaded |
| when the light source is too bright such as direct exposure to |
| sunlight or halogen light. You need to reposition the IP |
| Wireless Security Night Vision Camera into a more shaded |
| area immediately as this will damage the CMOS sensor. |
|
|
Question | There is bad focus on the IP Wireless Security Night |
| Vision Camera, what should be done? |
|
|
Answer | You need to adjust the IP Wireless Security Night Vision |
| Camera focus manually as described in Adjust IP Wireless |
| Security Night Vision Camera Focus. |
|
|
Question | Noisy images occur how can I solve the problem? |
|
|
|
|
Answer | There might be wireless transmission interference make sure |
| there are no other wireless devices on the network that will |
| affect the wireless transmission. |
|
|
Question | There is poor image quality, how can I improve the image? | ||
|
|
|
|
Answer | • | A probable cause might be the incorrect display | |
|
| properties configuration for your desktop. You | |
|
| need to open the Display Properties on your | |
|
| desktop and configure your display to show at least | |
|
| 65’000 colors for example at least |
|
| • | Applying only 16 or 256 colors on your computer | |
|
| will produce dithering artifacts in the image. |
|
| • | The configuration on the IP Wireless Security Night | |
|
| 65 | |