NetCamera NVW

Question

Why does the Link LED not light up properly?

 

 

 

Answer

•

There might be a problem with the network cable.

 

 

To confirm that the cables are working, PING the

 

 

address of a know device on the network. If the

 

 

cabling is OK and your network is reachable, you

 

 

should receive a reply similar to the following

 

 

(…bytes = 32 time = 2 ms).

 

•

The network device utilized by the IP Wireless

 

 

Security Night Vision Camera is not functioning

 

 

properly such as hubs or switches. Confirm the

 

 

power for the devices are well connected and

 

 

functioning.

 

The wireless connection might be at fault. In ad-hoc mode

 

make sure the IP Wireless Security Night Vision Camera

 

wireless channel and ESS-ID is set to match the PC/Notebook

 

wireless channel and ESS-ID for direct communication. Under

 

infrastructure mode make sure the ESS-ID on the

 

PC/Notebook and the IP Wireless Security Night Vision

 

Camera must match with the Access Point＇s ESS-ID.

 

 

 

Question

Why does the IP Wireless Security Night Vision Camera

 

work locally but not externally?

 

 

 

 

 

 

Answer

•

Might be caused from the firewall protection. Need

 

 

to check the Internet firewall with your system

 

 

administrator.

 

•

The default router setting might be a possible

 

 

reason. Need to double check if the configuration

 

 

of the default router settings is required.

 

 

 

A02-IPCAM4-W54

64