“Intelligent IP Installer” software

Launch the software just installed, then click on “search” button.

NOTE: The NetCamera is configured to get a dynamic IP address from a DHCP server

in the network. If DHCP service is not available, the NetCamera will use an IP address

in the range from 192.168.1.2 to 192.168.1.254. In this case, put 192.168.1.1 IP

address in your PC network card configuration in order to start the product configuration.

The “Intelligent IP Installer” software, will automatically recognize the cameras

connected to the network. Click “Link to IE” to open the WEB configuration page.

Use the following username and password to proceed with the product configuration.

Username: admin

Password: admin

- 5 -

ATTENTION

Use of audio or video equipment for recording the image or voice of aperson without their knowledge and consent is prohibited in certain states orjurisdictions. Nothing herein represents a warranty or representation that the Atlantis product provided herein is suitable for the end-user's intended use under the applicable laws of his or her state. Atlantis Land SpA disclaims any liability whats oever for any end-user use of the Atlantis product, which fails to comply with applicable state, local, or federal laws.

CE/EMC restriction of liability

The product described in this handbook was designed, produced and approved according to the EMC-regulations and is certified to be within EMC limitations.

If the product is used in an uncertified PC, the manufacturer undertakes no warranty in respect to the EMC limits. The described product in this handbook was constructed, produced and certified so that the measured values are within EMC limitations. In practice and under special circumstances, it may be possible, that the product may be outside of the given limits if it is used in a PC that is not produced under EMC certification. It is also possible in certain cases and under special circumstances, which the given EMC peak values will become out of tolerance. In these cases, the user himself is responsible for compliance with the EMC limits.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Viewing the images

1.During the first access, the web browser will need to install the ActiveX viewing software.

2.Click on ”Install ActiveX Control” to proceed.

3.Click “Install” to install the ActiveX software.

- 6 -

Important information for the correct recycle/treatment procedures of this equipment

The crossed-out wheeled bin symbol printed on the unit label or unit packaging indicates that this equipment must not be disposed of as unsorted municipal waste but it should be collected separately. The waste of electric and electronic equipment must be treated separately, in order to ensure that hazardous materials contained inside the equipment are not

buried thereby providing potential future problems for the environment and human health. Moreover, it will be possible to reuse and recycle some parts of the waste of electric and electronic equipment, contributing to reduce the quantities of waste

to be disposed of and the depletion of natural resources.

As user of this equipment, you are responsible to return this waste of electronic equipment to an authorised collection facility set up by your Municipality. More detailed information on your nearest collection centre can be obtained from your Municipality or from other competent local entities.

If you are replacing the old equipment with a new equivalent product, the distributor must take-back the old equipment free of charge on a one-to one basis as long as the equipment is of equivalent type and fulfilled the same functions as the supplied equipment.

Your rôle in participating to the separate collection of waste of electric and electronic equipment is essential to ensure that environmental protection and human health objectives connected to a responsible treatment and recycling activities are achieved.

PS.: The above mentioned information are reported herewith in compliance with Directive 2002/96/CE, which requires a separate collection system and specific treatment and disposal procedures for the waste of electric and electronic equipments (WEEE). For further and more detailed information, we invite you to visit our website at www.atlantisland. com

4. Now you can use your NetCamera through the web browser.

- 7 -

Page 1 Page 2
Page 2
Image 2
Atlantis Land A02-IPCAM5 quick start Intelligent IP Installer software, Viewing the images, CE/EMC restriction of liability
Page 1 Page 2

A02-IPCAM5 specifications

The Atlantis Land A02-IPCAM5 is a state-of-the-art IP camera designed for security and surveillance applications in both residential and commercial environments. Renowned for its advanced features, the A02-IPCAM5 provides high-quality video capture combined with user-friendly functionalities, making it an ideal choice for users seeking reliable monitoring solutions.

One of the key highlights of the A02-IPCAM5 is its impressive video resolution. With the capability to deliver full HD 1080p video, this camera ensures crystal clear images, enabling users to monitor their spaces with remarkable detail. The wide-angle lens further enhances its coverage, allowing users to observe larger areas without the need for multiple cameras.

The A02-IPCAM5 is equipped with infrared night vision technology, which enables it to capture clear footage even in low-light conditions. This feature is particularly important for security applications, ensuring that users can rely on their camera to provide continuous surveillance, day and night.

Another significant aspect of the A02-IPCAM5 is its integration with smart home technologies. Supporting Wi-Fi connectivity, the camera can be easily configured with existing home networks. Users can access live feeds and recorded footage remotely through a intuitive mobile app available for both iOS and Android devices. This capability allows for real-time monitoring and easy management of video recordings from anywhere in the world.

The camera also incorporates advanced motion detection technology. Users can set up customized notification alerts that are triggered when motion is detected within the camera's field of view. This proactive approach to security ensures that any unusual activity is promptly brought to the user's attention, allowing for timely interventions if necessary.

In terms of installation, the A02-IPCAM5 offers flexible mounting options. Its versatile design means it can be installed on walls, ceilings, or even in outdoor environments, provided it is properly sheltered. The robust build quality ensures durability, making it suitable for various weather conditions.

The Atlantis Land A02-IPCAM5 is not only technologically advanced but also designed with user experience in mind. The straightforward setup process and comprehensive documentation ensure that users of all skill levels can install and operate the camera effectively.

In summary, the Atlantis Land A02-IPCAM5 stands out as a powerful and versatile IP camera, merging high-definition video capabilities, advanced night vision, smart connectivity, and user-friendly functionalities. It represents an excellent choice for anyone looking to enhance their security monitoring systems, ensuring peace of mind through superior surveillance technology.
Top Page Image Contents