ENGLISH

1.9 Software InstallationSystem Requirements

Before installing the Adapter, your PC should meet the following:

ƒPC with available USB V2.0/1.1* slot

ƒIntel® Pentium®III 600Mhz or compatible processor with 128MB RAM

ƒWindows 98SE/ME/2000/XP operating system

ƒMinimum 15 Mbytes free disk space for installing the driver and utilities

ƒCD-ROM drive

*When plug the device in the USB 1.1/1.0 port, the real throughput will be up to 6Mbps only when running 11Mbps or higher speed

Hardware and Software Installation

This section describes the procedures of installing the driver and utility. Follow the instruction step by step to finish the installation. If you use Windows® 98SE/ME, please prepare the Windows® Setup CD at hand before installing the driver; because the system will ask you to insert the Setup CD to copy files during the installation.

Start Windows. Insert the driver CD into your CD-Rom drive.

Go to your Windows Start menu and choose Run, type “CDRom:\USB\Vista \Setup.exe or CDRom:\USB\XP2K\Setup.exe ” in the dialog box and click OK. Simply follow the instructions below which outline what you needto do.

Before insert the USB Dongle into USB port of your computer, please install the Utility Program first. Make sure that the 802.11g Wireless USB 2.0 Adapter is NOT inserted into the USB slot.

A02-WS2