Wireless 108Mbps USB Adapter

•After installing the driver of USB, there will be another pop-up window to guide you to keep installing the driver of USB Dongle.

•Click “Next >”. Select “Install the software automatically (recommended)” then click “Next>”. In next window, click “Continue Anyway” then click “Finish”.

•To make sure if the installation is successful, you could check it through the device management.

1.4Utility

Once the installation is successful, a utility program icon will show on your desktop (108Mbps Wireless Network USB Dongle Configuration Utility). To lunch the utility, just double click the icon.

In the Configuration Utility, select “Site Survey” tab, and click “Refresh” button to search the available wireless network(s). Select the network you want.

1.If you have not enabled wireless encryption on your network, then just click “Connect” button to activate wireless connection immediately.

2.If the wireless encryption is enabled click “Connect” button then choose encryption and put correct password on the next page, then click on Apply.

3.If doesn’t show any available wireless network, click “Add” button to setup encryption and SSID.