Atlas Sound AA-PPRC Introduction, Features, Warning When The Device Is In Use, Owners Manual

AA-PPRC

WARNING WHEN THE DEVICE IS IN USE

OWNER'S MANUAL

•To prevent electric shock, do not remove the product cover as there are high voltage components inside. Refer all servicing to Atlas Sound.

•Should any of the following irregularities occur during use, immediately switch off the power,

disconnect the power cord from the AC outlet and contact Atlas Sound. Do not to attempt to continue operation with the product as this may cause fire or electric shock:

•Smoke or strange smell coming from the unit.

•If the product falls or the case is damaged.

•If water or any metallic objects falls into the product.

•If the power supply cord is damaged in any way.

•If the unit is malfunctioning.

•Do not insert or drop metallic objects or flammable materials into the ventilation holes of the product's cover, as this may result in electric shock or fire.

•Do not place any containers with liquid or metallic objects on the top of the product. If any liquid spills into the unit, fire or electric shock may result.

•Never operate this product or touch the power supply cord during an electrical storm, electric shock may result.

•Never exceed the wattage on the product when connecting equipment. Fire and/or property damage may result.

•Operate the product only with the voltage specified on the unit. Fire and/or electric shock may result if a higher voltage is used.

•	Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and do not place
	heavy objects on the power cord, including the product itself, doing so may result in fire or electrical shock.

•Replace the protective cover over the speaker terminals after installation. Do not touch the 70V speaker terminals as electric shock may result.

•Ensure that the safety ground terminal is connected to a proper ground. Never connect the ground to a gas pipe as a catastrophic disaster may result.

•Be sure the installation of the product is stable, avoid slanted surfaces as the product may fall and cause injury or property damage.

2.0 INTRODUCTION

The Atlas Sound Priority Pager Relay Controller is a two input by two output speaker level relay switcher. The AA-PPRC is designed to be placed between an amplifier output and the speaker load. It can be used with 70V or low impedance systems. Each channel can handle up to 350 W @ 70V. Placement of the relay controller is not critical because the systems switching can be triggered from a variety of sources. Both High Level and Line Level signals can trigger the relay control circuit as well as a wide range of DC voltages. Contact closer terminals have also been incorporated for your convenience. Relay release can also be adjusted allowing for proper paging override tuning. The AA-PPRC can be used in variety of installs such as board room applications where an audio presentation system needs to be muted so the page can be heard. The presentation system will resume when the page has completed. It is also ideal for zone paging management for new or existing systems.

FEATURES

•Speaker Line Remote Switcher

•2 Channel

•350 W @ 70V per channel

•Wiring configuration for connecting or disconnecting a speaker load.

•Audio High Level Trigger sense with threshold adjust

•Audio Line Level Trigger sense with threshold adjust

•DC Trigger

•Contact Closure Trigger

•Relay Trigger threshold adjust

•12V DC UL power supply

•Phoenix type I/O connectors

•Metal housing

•Compact H 1.5" x W 4" x L 4.5"

Specifications are subject to change without notice

www.AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •		TELEPHONE: (800) 876-3333 •	FAX: (800) 765-3435
© 2007 ATLAS SOUND LP	Printed in U.S.A.	ATS002915 RevA 9/07	4