ARCHITECT & ENGINEER SPECIFICATIONS
Siren loudspeaker shall be Atlas Sound Model
______ Watts RMS. Rated frequency response range shall be ____
____________ Hz ±5dB when measured on a plane wave tube at 1
mW. Unit shall have a sound pressure output of ______dB at rated
power when measured on a plane wave tube at 1 mW. Driver shall be capable of standard indoor/outdoor use and be
|
|
NOTE: Plane wave tube measurements provide resistive loads to test drivers. Actual frequency response of a driver / horn combination will vary depending on the horn used with the driver. Consult individual horn specification sheet for typical horn frequency response.
Specifications subject to change without notice
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. | AtlasSound.com |
TELEPHONE: (800) |
© 2006 Atlas Sound LP | Printed in U.S.A. | ATS002453 RevA 8/06 |