SM42T to accommodate the Atlas Sound SMBALLMOUNT bracket | via a sealed switch located near the input section on the rear of |
or OMNIMOUNT™ 10 series brackets. All inserts for mounting knobs | the cabinet. Internal transformer may also be bypassed for |
are standard | operation via tap selector switch. A flush cover with wire exit hole |
shelf" vandal proof torx head or | is provided to insure input connections and tap selector switch are |
include a sealed | protected. Systems are available in Black or White finishes and can be |
#14AWG wires. 2, 4, 8, and 16 watt taps are screwdriver selectable | painted to accommodate any architectural considerations. |
ARCHITECT AND ENGINEER SPECIFICATIONS
The indoor/outdoor
Assemblies shall consist of
distributed sound applications. Wattage taps shall be screwdriver selectable via a sealed switch located near the input section. Wattage taps shall be 2W, 4W, 8W, 16W @ 70.7V. The loudspeaker system shall meet the following performance criteria: Power handling, 30 watts RMS. Frequency response, +/- 5 dB from 115 Hz to 16 kHz. Sensitivity shall be 88dB SPL at one watt, 85 Hz to 16 kHz measured at a distance of one meter on axis. Impedance shall be 8 ohms nominal. Input connectors shall include a
SM42T Frequency Response
(Transformer Bypassed)
dB
Frequency (Hz)
Specifications subject to change without notice
TELEPHONE: (800) | AtlasSound.com |
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. |
|
© 2005 Atlas Sound | Printed in U.S.A. | 000105 | ATS001935 RevA 01/05 |