•Premium -Quality, Contoured, Square Grille Provides Professional Appearance of 8" (203mm) Loudspeakers
•Concealed Loudspeaker Studs and Torsion Mount Eliminate Visible Hardware
•Fine-Mesh Grille Blends with Decor
APPLICATION
Install model T620-8 deluxe baffle in areas where premium appearance and hardware-free design are specified requirements for 8" (203mm) loudspeaker baffles. Quality construction with beveled frame, small mesh grille, and no visible hardware make them suitable for hotels, law offices, high-end retail and professional spaces of all kinds.
GENERAL DESCRIPTION
Model T620-8 is a two-piece square baffle for mounting a standard 8" (203mm) loudspeaker. Loudspeaker installs to welded studs on the baffles subplate. The subplate includes a "no-leak" gasket to prevent bass leak. Construction is 20- gauge CRS with a welded CRS grille. The assembly is finished in textured white epoxy and installs using a torsion-spring device for attractive hardware-free appearance.
T620-8
ARCHITECT AND ENGINEER SPECIFICATIONS
The metal baffle shall be Atlas Sound Model T620-8 or approved equal. It shall be of two-piece CRS construction with a separate subplate with welded studs to mount a standard 8" (203mm) loudspeaker. It shall also include a gasket to pre- vent bass leak. Baffle shall use torsion springs for mounting to protective enclo- sure Model _________ (EZ198-8, T198-8, T198-8-5, or SE175-4) or mounting
ring Model ________ (T72-8, T72-8E1, T72-8E2 or approved equal. Finish shall
be textured white epoxy.
Note: For proper support, torsion spring grilles should not be used with loudspeaker assemblies exceeding 5 lbs.
