Atlona AT-AVS100 user manual Front Panel, Top Panel

1.Output resolution switch: This dip switch allows user to set PC/Component output Timing to PC

resolution: XGA/SXGA/UXGA or Component resolution: 480p/576p/720p/1080p. Simply push the dip switch to left, middle or right and the output image will display your desired resolution. For PC/ Component timing selection please refer to Section 6.3 Front Panel.

2.PC OUT: Connect VGA Cable to a VGA Display or VGA to Component Cable to a Component Display

6.3. Front Panel

①

1.PC/HD switch: This dip switch allows user to select PC or component HD output. Simply slide the dip switch to left or right and the output mode will display your desire selection.

6.4. Top Panel

①

1.CV/SV: Press this button to switch input source between composite or S-Video. The Led will illumi- nate in yellow when switch to composite input and red when switch to S-Video input.

ATLONA PRODUCT REGISTRATION

Thank you for purchasing this Atlona product — we hope you’ll enjoy it.

We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates.

At Atlona, we respect and protect your privacy and assure you that your registration information is completely secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited war- ranty rights.

To register go to www.atlona.com/registration

www.atlona.com toll free: 1-877-536-3976
	5
For International: 1-408-962-0515