www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515 3
INTRODUCTION
PACKAGE CONTENTS:
APPLICATIONS
The Atlona AT-DIS7-PROHD is a 7” testing monitor designed for those looking to test cabling and the
installation of different components. This monitor is useful where displays are in a remote location or
not yet present. This portable display will recognize any HDMI, DVI, VGA or Component Video source
at resolutions up to 1080p or 1920x1200 (including a huge variety of other HDTV and Computer Reso-
lutions), and allow integrators and installers to observe both audio and video signals in real time. The
AT-DIS7-PROHD can be used to test 3D sources, even though it is not a 3D monitor; however when
3D signal will be sent to it, the monitor will display that it is receiving 3D content.
The AT-DIS7-PROHD is featured with tripod inputs on top and bottom of the unit and also the ability to
be rack-mounted (size 4U). The Rack Ears could be purchased separately.
Note: User can purchase an optional battery which can last approximately 5 hours, model # AT-BAT-DIS7PRO
• Residential or Commercial Installation. The AT-DIS7-PROHD is a very handy (must have) tool which
helps to make sure that all cables, extenders, switchers, AV receivers are passing proper signal before
the installation is nished. Most installations are done far before the displays arrive; Therefore DIS7-
PROHD is a perfect tool to make sure everything works. The DIS7-PROHD is recommended to be used
with AT-HD800 (HDMI Signal Generator) and it will allow installer to test every resolution, HDCP, EDID
and even 3D.
• Cable, Source Manufactures. Manufactures could be using DIS7-PROHD in their QC department to
make sure certain frequencies and resolutions are working.
• Monitoring. The AT-DIS7-PROHD is a perfect addition to any rack unit, allows user monitor all signals
which are going out and troubleshoot without walking around the building to look at the display which
could be 100’s of ft away. User can purchase a set of rack mounting ears: AT-RK-DIS7PRO. Total size
would be 4U
• Broadcast. The AT-DIS7-PROHD is a perfect tool for any camera man or video operator who wants to
quickly see what is being recorded or view some footage. The DIS7-PROHD has a tripod connection
on top and bottom.
• Atlona 7” PRO HD Monitor with HDMI, VGA and Component Inputs
• 5V/2.6A DC power adaptor (optional battery can be purchased Model: AT-BAT-DIS7PRO)
• VGA to Component Video Cable
• Manual