Atlona AT-HD19SS atlona.com

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

1. Green LED - Will light up when receiving a signal from an HDMI (or DVI) source.

2. Red LED - Will light up when receiving power.

1. +5VDC: Connect included 5V DC power supply here

2. HDMI IN: Connect HDMI or DVI source here

3. HDMI OUT: Loop out for in zone display or cascading with another AT-HD19SS.

4. Mode: Change the setting to optimize EDID.

0 = 1080p@60Hz, 24bit color, and up to 7.1ch output

1 = 1080p@60Hz, 24bit color and 2Channel audio

2 = 1080p@30Hz, 1080i@60Hz, 720p@60Hz, 24bit color and up to 7.1ch audio

3 = 1080p@30Hz, 1080i@60Hz, 720p@60Hz, 24bit color and 2Channel audio

4 = 1080p@60Hz, 36bit color and up to 7.1ch audio

5 = 1080p@60Hz, 3D, 24bit color and 2Channel audio

6 = 1080p@60Hz, 3D, 24bit color and 7.1ch audio

7 = EDID Learning Mode – Learns the display’s EDID

Signal LED will blink for 10 seconds when learning EDID then go solid when complete

5. CAT5e/6/7 ports: Connect the CAT5e/6/7 to AT-HDRS to extend signal up to 130ft.

12345

For the CAT5e/6/7 cables used in these products’ set up, please be sure to use a 568B termination as

pictured below.

1. White - Orange

2. Orange

3. White - Green

4. Blue

5. White - Blue

6. Green

7. White - Brown

8. Brown