RS-232
Hyperterminal
To set up the RS-232 hyperterminal the first thing needed is to find the RS-232 communications port under the computer’s device manager. Once there right click the port and select properties. Under the properties menu select the port settings tab and update the menu to the switcher default:
Bits Per Second: 9600, Data Bits: 8, Parity: None, Stop Bits: 1 and Flow Control: None.
Connection
RS-232 is connected through a 9-pin female D connector. The pins will have functions associated with them, some will be unassigned.
Pin | Function |
---- | Not used |
Tx | Transmit |
Rx | Receive |
---- | Not used |
Gnd | Ground |
---- | Not used |
---- | Not used |
---- | Not used |
---- | Not used |
| atlona.com | 7 | Toll free: 1-877-536-3976 |
| Local: 1-408-962-0515 |
| | |
4 
3 
2 
1
8 
7 
6