Atlona HDMI 4 by 1 Switcher
Step by Step Guide
1.Place your switcher within 60 feet
(18.29 meters) of your video display.
Note: If using the
supplied IR remote control, remember you need to
be within 23 feet
(7 meters) and within a 60° angle of the
infrared receiver.
2.Connect
the
HDMI
cables to
your sources and the
switcher’s inputs labeled HDMI
IN. Note: The Ethernet
Channel will not
pass to
your devices if the
HEC feature is not
supported or you are not
using the
correct
HDMI
cables.
3.(Optional) Plug the
supplied Infrared module into the
IR IN port
and place the
receiver end somewhere that
is within 23 feet
(7 meters) of where you will be using remote. Note: The supplied infrared module will allow you to
control
the
Atlona
4.Plug the
power cord into the
DC 5V labeled port
and then
plug the
other end into the
wall.
5.(Optional) Plug the
Ethernet
cable into the
Ethernet
port. If your devices and cables are HDMI
Ethernet
Channel compatible you will be able to
pass the
internet
signal through
the
HDMI
cable.
Note: Please verify that
your devices are HDMI
Ethernet
Channel compatible, most
ports will be labeled HEC for easy identification.
6.(Optional) Plug the
Digital (S/PDIF) cable into the
S/PDIF
port. If you have an audio system this
will allow for 2 channel and
Note: If
the
Digital Audio is plugged in it
will
take
first
priority over the
HDMI
audio connection. Neither Dolby TrueHD or 
option.
a.(Optional) ARC Mode – The Audio Return Channel can be accessed through
the
switcher, by reselecting the
source you currently have selected (all source lights will go off). The switcher will
then
pass through
the
audio from your video display to
your A/V Receiver as an ARC signal (this will only work with ARC capable displays). Your video display will pass through
audio from either
its internal
tuner
or from any device plugged into it.
7.Connect
one end of the
HDMI
cable into the
video display and the
other end into the
port
labeled HDMI
OUT on the
switcher.
8. Press the power button (on either the remote or the switcher) | to turn on the |
|
9.(Optional) If using the
cable into the
switcher, then
your computer or third
party control.
Note: You can purchase the
a.PC control will need a hyperterminal program. If you do not
have one then
you will need to
download or purchase one and follow their
instructions for the
program’s installation.
Toll free: | 7 | atlona.com |
Local: |
